Skip to content
    Modern Tech Group
    Compressor rental with delivery and connection+48 733 140 488

    Screw compressor rental - standby power when your unit fails

    Our rental fleet covers screw compressors of all power ratings, matched to your demand to keep the industrial line running while the main machine is being repaired or overhauled. Units are stored in ready-to-dispatch state in Radom: hoses coiled, oil topped, hour meter reset. A confirmed rental order before noon means delivery to central-Poland sites the same day.

    Rental agreements are drafted in English and priced in EUR (daily, weekly or monthly rates). For EU-registered lessees we apply VAT reverse charge. The delivered compressor comes with a signed English commissioning protocol - pressure setpoint, flow test, noise level at 1 m - ready for site QA files.

    How the rental works

    • Screw compressors of all power ratings, selected for your air demand and working pressure
    • 24-hour delivery to central-Poland sites - Mazowsze, Świętokrzyskie, Lubelskie, Małopolska
    • English lease agreement, EUR pricing, EU VAT reverse charge for cross-border lessees
    • Signed English commissioning protocol on delivery - flow, pressure and noise test included

    Request a rental quote

    Send required flow (Nm³/min), working pressure (bar), site address and expected rental duration. We come back with unit availability and EUR pricing within two working hours.

    Email the rental desk - biuro@moderntechgroup.pl

    Rental compressor fleet - availability and delivery

    Our rental fleet is electric screw compressors of all power ratings, selected for your demand, all oil-injected, with matching refrigeration dryers and air receivers. Fleet is kept at 'ready-to-ship' condition in Radom: oil topped up, filters current, controls tested weekly. Delivery to anywhere in central Poland within 24 hours of a confirmed booking; 48 hours for Silesia, Wielkopolska and northern Poland.

    Delivery includes truck with tail-lift, unloading, positioning inside your compressor room (or in a weather-protected outdoor location), electrical connection to your switchgear, piping into your ring main via a standard flanged tie-in, and commissioning under load. Pick-up follows the same process in reverse. You call and pay for hire time only - mobilisation and demobilisation are quoted upfront and fixed.

    When rental beats emergency repair or purchase

    • Bridge during overhaul or major repair

      If a primary compressor is down for a week for overhaul, rental is almost always cheaper than lost production. Prorated by the hour, so a 5-day overhaul costs 5 days of rental, not a full week.

    • Coverage during compressor-room modernisation

      Modernisation projects need a stand-by unit during the cutover phase. Renting one for 4-8 weeks is a fraction of the cost of an emergency purchase, and returns to us afterwards - no idle asset on your balance sheet.

    • Seasonal or project-based capacity increase

      For temporary capacity spikes (new production line commissioning, seasonal peak, third-shift trial), rental lets you add exactly the capacity needed for exactly the period needed, then release it. No permanent oversizing.

    • Backup during OEM warranty dispute

      When a new compressor is under warranty dispute and the OEM is dragging on the repair, rental keeps production running while the legal question is resolved. We have delivered rentals within 24 hours specifically to this scenario.

    • Prorated to the hour, not the day

      Rental invoicing is prorated by the hour of actual use. A rental that returns after 3 days 4 hours is invoiced for 76 hours, not 4 days. Small thing that matters when the actual downtime is 5-6 days rather than a round week.

    FAQ - industrial compressor rental

    Central Poland (Mazowieckie, Świętokrzyskie, Łódzkie, Lubelskie, Małopolskie): yes, 24 hours from confirmed booking. Silesia and Wielkopolska: 24-36 hours. Northern Poland (Pomorskie, Warmińsko-Mazurskie): 36-48 hours. These are commitments we hit, not aspirations.

    For a straight primary-unit replacement, match your primary's nominal power at your normal working pressure. For a capacity boost, we can size against your measured demand - send us your primary compressor model and typical duty cycle and we will recommend within an hour. We rent screw compressors of all power ratings, selected for your air demand and working pressure.

    Included: compressor, matched refrigeration dryer if requested, air receiver if you need one, standard oil top-up during rental. Not included but quoted upfront: transport (fixed by distance), on-site electrical connection labour, piping tie-in kit if you don't have standard flanges. Everything is on the quote before you confirm.

    Yes. Any unit in our rental fleet can be purchased at a formal used-equipment valuation, with a portion of hire fees already paid applied against purchase price (typically 30-50% of hire, depending on rental duration). This is a real option, not a rhetorical one - we do this several times a year.

    More from our compressed air services

    Screw compressor servicePeriodic servicing, diagnostics and emergency repairs of screw compressors, over 30 brands.Compressor overhauls and air end rebuildsGeneral overhauls and air end rebuilds.Compressed air energy auditLeak detection, energy analysis, pressure measurements and a savings report.Leak detectionUltrasonic leak survey during normal production, every leak tagged and costed.Compressed air dryer serviceRefrigerant and desiccant dryer repairs, overhauls and dew point diagnostics.Compressed air filtration and treatmentFilter selection, element replacement and ISO 8573-1 air purity classes for your process.Compressed air heat recoveryTurn compressor waste heat into hall heating or hot water, fitted during a planned service.Compressed air system modernizationPiping, control and compressor room upgrades that stabilise pressure and cut energy use.Spare parts and consumablesFilters, oils, separators and valves matched to your machine by serial number.Screw compressor salesNew and rebuilt screw compressors with sizing, installation and commissioning.Compressor service agreementsMaintenance contracts with priority response, scheduled servicing and discounts on consumables.About usWho we are, how we work and where our service team is based.Turnkey compressor roomsDesign, equipment selection, installation, commissioning and service agreements.Airpress compressor serviceAPS inspections, repairs, airend overhauls and spare parts.Nitrogen generatorsPSA and membrane systems, Hertz HNG, selection and servicing.Oxygen generatorsHertz HOX and zeolite PSA systems for technical oxygen, not medical use.Hertz compressorsCompressor series, dryers and technical gas generators.Compressed air services - overviewService, overhauls, rental, audits and parts for industrial compressed air in Poland.

    Contact

    Need an inspection, overhaul or rental? Fill out the form - we'll respond within 24 hours.

    Send inquiry

    What is your enquiry about?

    0/2000

    We usually send a preliminary quote the same working day. Machine down? Call 24/7: +48 733 140 488

    Email

    biuro@moderntechgroup.pljanduda@moderntechgroup.plrobertduda@moderntechgroup.pl

    Find us on the map

    ul. Słowackiego 201 26-600 Radom Mazovian Voivodeship, Poland

    24/7