Screw compressor sales - new and rebuilt units
We size the compressor around the air your plant actually consumes, deliver it, install it and commission it - then keep it running for its whole service life. One supplier from purchase to 24/7 support.
If you are planning a complete new compressor room, see turnkey compressor rooms.
- Free sizing and quotation within one working day
- Delivery, installation and commissioning included
- Trade-in of your existing compressor
- Warranty and 24/7 service from day one
Authorized distributor of Hertz Kompressoren
We are an authorized distributor and service partner of Hertz Kompressoren. Our range covers Hertz Kompressoren compressors - fixed-speed and variable-speed screw units, oil-free machines, air stations for laser cutting, plus refrigeration and desiccant dryers. Delivery, installation and first commissioning are part of the offer.
See Hertz Kompressoren compressors
Match the motor rating to your plant
The ranges below are a starting point - the final selection is confirmed after we measure real air consumption and the duty cycle.
Not sure what rating you need - start with a compressed air audit: logging the demand profile and the leak level shows which machine the plant really needs.
4-11 kW
Send an enquiryworkshop, tyre service, small paint shop
approx. 0.5-1.5 m³/min
15-22 kW
Send an enquirypaint shop, joinery, mid-sized production plant
approx. 2-3.5 m³/min
30-45 kW
Send an enquiryproduction plant, single process line
approx. 5-7.5 m³/min
55-90 kW
Send an enquiryindustry, continuous 24/7 duty
approx. 9-15 m³/min
Above 90 kW
Send an enquiryheavy production, multi-machine compressor rooms
individual configuration and quotation
New screw compressors
We size each machine for a specific installation and budget, without being tied to a single manufacturer. First we look at air demand, working pressure and duty cycle, and only then propose models. We also advise on the ancillaries - receiver, dryer and filtration - so the whole system runs efficiently rather than just the compressor.
Rebuilt compressors with warranty
Machines that went through a full air end rebuild with new bearings and seals, then ran on the test bench - clearly cheaper than new, covered by our warranty and full service support. A sound choice when the budget is tight or when the unit is meant to work as a standby.
New or rebuilt? Side by side
| Criterion | New | Rebuilt |
|---|---|---|
| Purchase cost | Full market level | Clearly lower budget |
| Warranty | Manufacturer warranty | Our warranty after rebuild and testing |
| Lead time | Per manufacturer, usually several weeks | Often ex stock or within days |
| Service life | Full service life | Restored life after new bearings and seals |
| Best suited for | Long-term investment, continuous duty | Limited budget, standby unit, urgent need |
Dryers and compressed air equipment
Refrigeration and desiccant dryers, air receivers, in-line filtration and compressed air piping - we put together the complete compressor room, not just the compressor.
We supply BEKO Technologies air treatment components: CLEARPOINT filters, DRYPOINT dryers, BEKOMAT condensate drains and METPOINT instruments.
Nitrogen and oxygen generators
We also sell industrial gas generators supplied with compressed air, including selection, installation and commissioning of the complete system.
Sizing, delivery, installation, commissioning
Demand analysis
We check real air consumption, the required pressure and how the plant actually runs.
Two or three options
We present specific models with a quotation and a comparison of running costs.
Delivery and installation
Transport, positioning in the compressor room and connection to your existing piping.
Commissioning and training
Start-up, parameter settings and operator training for day-to-day running.
Why buy from us
24/7 service from the same supplier
Machine and service come from one place - when something fails you call us, not a third party you have never worked with.
Parts stock in Radom
Filters, oils and separators for the machines we sell are on our shelves, so a service visit does not wait for a delivery.
Service agreement from day one
Right after commissioning the unit can enter a maintenance plan, with a service history from its first running hour.
We buy back your old compressor
When you purchase a new unit we take the existing machine into account, whatever its condition. The old compressor is valued as part of the offer, with no extra paperwork for you.
Not sure which compressor to choose?
Tell us the application, the number of workstations or tools and the machine you use today - we will calculate the demand free of charge and come back with two or three options and a quotation within one working day.
Frequently asked questions
The questions buyers ask us most before ordering a screw compressor.
Planning a compressor purchase?
We will send two or three options with a quotation - new and rebuilt units.
Ask for a compressor quotation
Tell us what your compressed air demand looks like - we will size the machine, calculate the running cost and value the trade-in of your old compressor.
- Sizing based on measured demand
- New and rebuilt machines
- Installation and commissioning included
- 24/7 emergency service after purchase
While you wait for a new machine you can bridge the gap with a rental compressor. Once the unit is running we can cover it with a service agreement - a fixed maintenance plan and a documented service history from the first running hour.